Custom RFID Antenna Coil
An RFID antenna coil is the precision-wound inductor that couples a reader or transponder to a magnetic field, and it decides how reliably a card, tag or tool is detected. Chengpin builds these coils to drawing for OEM equipment makers in access control, readers, industrial sensing and 3D printing.
RFID Antenna Coil for OEM Equipment
An OEM antenna coil is a small part of a larger assembly, so it must fit the mechanical stack and match the electronics at the same time. In low frequency systems the coil forms part of a tuned resonant circuit, where inductance, DC resistance and Q interact with the reader drive circuit and matching network. More turns raise inductance but also resistance and can lower Q. Typical reference bands are LF 125 kHz, 134.2 kHz and HF 13.56 MHz.
Send your target band, inductance and envelope for a winding geometry review.
Access Control Induction Coil and Reader Antenna
Access control and time-attendance equipment is a common home for an access control induction coil. The coil sits behind a plastic front panel or inside a reader module, often with a ferrite support that shapes the field toward the credential. Reader antenna designs for proximity cards, fobs and NFC devices differ in turns, winding window and core material, and small geometry changes shift read range noticeably. We review the mechanical stack, panel thickness, read distance and credential type before proposing a geometry.
Share your reader housing and read-distance requirement for an antenna review.
3D Printer Antenna Coil
3D printers use RFID and inductive sensing where an optical or mechanical sensor is unreliable: identifying a tool head, reading a filament spool tag, or detecting a metal target in a build chamber. A 3D printer antenna coil must survive heat, vibration and repeated movement, so winding integrity and termination strength matter as much as inductance. Where your printer specifies a reader chip and matching network we wind to that target; where the design is open, we review geometry, environment and service life with you.
Describe the printer application and environment for a winding review.
Typical Custom Parameters
Nothing below is a stocked standard; every value is fixed by an engineering review against your drawing.
| Parameter | How it is set |
|---|---|
| Inductance | Custom per drawing; confirmed at engineering review |
| Frequency | Custom; LF 125 kHz / 134.2 kHz and HF 13.56 MHz can be evaluated, final value agreed with your circuit |
| Q / Resonance | Custom; reviewed with your matching network and drive circuit |
| Wire | Custom per drawing; enameled copper wire from 0.011 mm (AWG56) upward |
| Shape | Custom per drawing; round, rectangular, oval or irregular |
| Size | Custom per drawing; coil diameter 0.011 mm - 300 mm, minimum finished part 1 mm |
| Lead / Terminal | Custom per drawing; flying leads, terminals or customer-specified connectors |
| Support Materials | Custom per drawing; ferrite core or bobbin, tape, potting or moulded support |
| Tolerance | Custom per drawing; achievable tolerance confirmed at engineering review |
| MOQ | 1000 pcs standard mass production; prototype quantities negotiated separately |
| Sample Lead Time | Typically 3 days after engineering confirmation; complex structures negotiated separately |
Send your drawing and we will confirm each parameter in writing.
Materials and Winding Capabilities
Chengpin is a custom antenna coil manufacturer working in fine wire. Our winding equipment handles enameled copper wire down to 0.011 mm (AWG56), and we process coils with a diameter from 0.011 mm to 300 mm. We can develop micro coils with an inner diameter as small as 0.19 mm, and the smallest finished part we produce is 1 mm. Materials include self-bonding enameled wire, litz constructions, ferrite cores and bobbins, film and tape insulation, potting compounds and injection-moulded supports.
Tell us the wire and materials on your drawing and we will confirm process capability.
OEM/ODM Development Process
Requirement Review
We start from your drawing, 3D model or specification and the system targets: frequency band, inductance, resistance, Q, envelope, environment and annual volume. You receive a written list of open questions and feasibility concerns before tooling time is committed.
Engineering Proposal
Our engineers convert the requirement into a proposal: wire gauge, turns, winding window, core or bobbin, termination method and support materials, with expected tolerance and test plan.
Prototype and Validation
Prototypes are wound and measured for inductance, DC resistance and Q against your targets. For standard designs samples are typically ready 3 days after engineering confirmation; complex structures are quoted with their own lead time, and samples are normally sufficient for your own functional and reliability testing.
Pilot and Mass Production
After prototype approval we run a pilot batch to confirm process, fixtures and inspection method, then move to mass production. Standard production MOQ is 1000 pcs; prototype quantities are negotiated separately. Lots are inspected against the agreed plan.
Send your drawing for a development review; we will return questions and a proposal.
Quality Management and Verification
Chengpin operates a company-level quality management system certified to ISO 9001, ISO 14001 and IATF 16949, and the company holds UL E339580. These are company-level registrations, not a statement that every product is certified; product-specific certificates are confirmed item by item. Our reliability laboratory can run RoHS 2.0 screening, thermal shock, damp heat (85 °C / 85 % RH), salt spray, vibration and safety life verification on request. In production, coils are measured for inductance and DC resistance against agreed limits.
Share your test and documentation requirements and we will confirm what applies.
Applications
- Access control and time-attendance readers
- Handheld and fixed RFID / NFC readers
- 3D printer tool, spool and build-chamber identification
- Industrial inductive position and proximity sensing
- Animal identification and industrial asset tags
- Smart home and consumer device antennas
- Medical and laboratory instruments using a custom-wound sensing coil
Tell us the application and we will suggest the coil constructions usually involved.
Frequently Asked Questions
What information do you need to quote a custom antenna coil?
Frequency, inductance, resistance or Q, dimensions and envelope, wire and material, lead or connector details, operating environment, prototype quantity and expected annual demand.
Which frequencies can you support?
LF 125 kHz and 134.2 kHz, and HF 13.56 MHz can all be evaluated. Final frequency, inductance and Q value are agreed with your circuit, matching network and housing.
What is your MOQ?
Standard mass production MOQ is 1000 pcs. Prototype quantities are negotiated separately.
How long does a sample take?
For standard designs samples are typically ready 3 days after engineering confirmation; complex structures are quoted with their own lead time.
Which coil shapes can you make?
Round, rectangular, oval and irregular shapes are supported; geometry is defined by your drawing and confirmed at review.
Can you supply leads, connectors and support parts?
Yes. Flying leads, terminals, customer-specified connectors, ferrite supports and injection-moulded parts can be integrated, subject to project review.
What is the status of your certifications?
ISO 9001, ISO 14001, IATF 16949 and UL E339580 apply at company level. Product-specific certificates and test reports are confirmed individually.
Still have a question? Send it with your drawing.
Request a Custom Antenna Coil Quote
Send your drawing, target frequency band, inductance and available envelope, and our engineering team will return a feasibility comment and a quotation. If the requirement is not yet frozen, send what you have.



